PROWILL 400

Although it varies depending on the type of mold, it lubricates approximately 20 - 30 m2 mold surface when applied with a roller, and approximately 40 - 60 m2 mold surface when sprayed with a pressure pump.

Note: The consumption values given are approximate and may vary depending on the application surface area and application thickness.

Before using PROWILL 400 GENERAL PURPOSE, the application surfaces should be carefully cleaned. The mold surface must be cleaned of concrete, wood, iron pieces, snow and ice.

PROWILL 400 must be shaken before use. No substance should be added to the product.

To obtain the best results, PROWİL 400 should be sprayed homogeneously on the mold in a thin layer (single layer) or brushed.

or should be applied with a roller. The material should not be allowed to accumulate on the surface and should be applied evenly to the entire surface. The ideal usage amount should be reached by experimenting in spray applications.

Technical specifications

Appearance : Cream-white colored emulsion (Mix before use)

Liquid Density:                                                 0.96 ± 0.02 kg/lt (20°C)

Flash Point:                                            Non-flammable (Water based)

Application Temperature:                                       ≥ 5°C (Protect from frost)

In 30 kg plastic drums and 200 kg barrels

Store in a dry and cool environment (temperatures above +80C), unopened in its original packaging. Do not leave in the sun and protect from frost. It has a shelf life of 12 months.

Do not consume solid or liquid substances or smoke during application. Use protective gloves, glasses and clothing. Avoid eye and skin contact. In case of skin contact, wash with plenty of water and soap. In case of eye contact, rinse with plenty of water and consult a doctor immediately. Keep out of reach of children. Do not swallow, do not use empty packages to store foodstuffs and drinking water.