PROTEK CURING 300

Surface Preparation

PROTEK CURING 300  It is not necessary to do any work on the concrete surface before application.

  APPLICATION

• The application is made after the application of concrete and surface hardener, when the concrete surface has set enough to not be distorted - after the concrete surface water has evaporated, immediately after the molds are removed, and before the formation of the joints.
• In brush or roller applications, sufficient hardening of the concrete is required to avoid damaging the concrete surface.
• In spraying applications, the material is sprayed on the surface in a thin layer of equal thickness.

• The material should be shaken well before use.
• The drying time of the material after the curing application is 2 hours at 20°C.
• After curing applications in open areas, the concrete surface should be protected from external factors such as rain and snow for 2-3 hours.
• After this period, the concrete surface is protected from rainwater.

     In subsequent applications on cured concrete, the concrete surface must be cleaned of the curing agent.

• Pouring hot water on the material and brushing it

CONSUMPTION

  Depending on the absorbency of the concrete surface and ambient temperature; 0.200 - 0.250 kg/m2

  30 kg drum

Shelf life is 1 year when stored in its original packaging, in dry, protected and ventilated environments at +5°C / +25°C, protected from direct sunlight and frost.

SECURITY PRECAUTIONS

Contact of the material with skin and eyes should be prevented, and in case of contact, wash with plenty of water. If swallowed, drink a few glasses of water and seek medical attention immediately. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Gloves, protective mask and glasses should be used during use.