ULTRA BE-K 2K

Surface Preparation
The existing surface is clean, dry, flat and free of dirt, dust, oil, wax, mold and PROTECT-A.
ULTRA BE-K 65 2K is designed to ensure that the surface is free from effects that may deteriorate its performance.
It is necessary to have.
All kinds of loose, dusty, cracked, crusted and previously painted surfaces
scraping, sanding, wire brushing and/or machine assistance (pressurized
must be cleaned with water spray or sandblasting).
At least 1500 – for washing existing surfaces on exterior surfaces with pressurized water.
There should be 2000 psi water pressure.
For metal roof surfaces, loose rust, milling, rust formations adhering to the surface
or white rust on the metal surface using the methods mentioned above.
They should be removed from the surface.
Damaged or decomposed surfaces must be repaired. Old painted surfaces and
irregularities should be sanded.
PROTECT-A ULTRA BE-K 65 2K is applied on all surfaces by adding water in a 1:1 ratio.
must be primed.
Before applying primer to the surfaces to be insulated, surface smoothness, surface
It should be checked that it is dry and clean and that there is a sufficient slope screed.
APPLICATION
PROTECT-A ULTRA BE-K 65 2K can be applied with brush, trowel or airless spray machines.
applicable.
PROTECT-A ULTRA BE-K 65 2K before and during application
should be mixed.
For best results, apply in two coats, leaving 4-6 hours between coats.
should be implemented. The next coat should not be applied until the first coat is completely dry.
Surface smoothing application with a roller immediately after spray application
This application is recommended as proper adhesion will be ensured when done.
is done.
Apply at surface and ambient temperature between 5˚ C – 35˚ C. External surface
Application against adverse weather conditions that may occur in applications
must be protected.