SUPER POLYMER PLUS SB

The surface is solid, free from loose and weak parts, free from frost, cement grout, ponded water, oil, grease, paraffin, coatings, etc. foreign matter and

other contaminants must be removed and clean. The surface must be prepared by appropriate mechanical preparation techniques such as high pressure water or abrasive equipment.

All dust, loose and friable materials must be completely removed before application, preferably by brush and/or vacuum.

PROTECT-A SUPER POLYMER PLUS SB Since it is a ready-made material, the product should be mixed before application and no thinner should be used.

It can be applied with brush, roller or airless spray machines. For best results, it should be applied in two coats with 4-6 hours between coats. Do not apply to wet surfaces.

In roller applications, the two layers should be applied perpendicular to each other.

(If the first layer is applied parallel to the length of the application surface, the second layer should be perpendicular to the length of the application surface.)