PU MASTIC
PROTEK PU MASTIC, High Quality, Single Component, for Sealing and Bonding Applications
It is Polyurethane Based Joint Filler Material Used
Download pdf document
• Storage and assembly areas
• Maintenance workshops, garages
• Multi-storey and underground car parks
• Maintenance hangars
• Beverage and food industry floors
• Hobby areas
It is single component and easy to apply.
It dries quickly.
It is resistant to weather conditions and UV rays.
It does not cause bleeding.
It has permanent elastic ability.
It has high chemical resistance.
It is not affected by weather conditions after curing.
Thanks to its high adhesion feature, it provides excellent adhesion to many building materials.
It does not contain PVC.
Thermal resistance is between -40 oC and +90 oC. (Resistant to +120 oC for a very short time)
It can be sanded and painted after curing.
It does not form air bubbles during curing.
It is ready to use and easy to apply.
Appearance Polyurethane based putty
Application Temperature +5°C to +35°C
Service Temperature -30˚C to +90˚C
Density 1.44 g/cm³ (DIN 53479)
Surface Drying Speed 30 minutes (+10 min.)
Drying Speed 3-4 mm / 24 hours (+23 oC, % 50 RH)
Shore A Hardness ~ 35 (DIN 53505)
Elastik Modulus %100 0,40 N/mm²
Color White, Gray –RAL COLORS
In its original packaging, in a dry, protected and ventilated environment at +5°C / +25°C, in direct sunlight.
The shelf life is 1 year when stored protected from light and frost.
Contact of the material with skin and eyes should be prevented, and in case of contact, wash with plenty of water.
If swallowed, drink a few glasses of water and seek medical attention immediately. by eye
In case of contact, wash immediately with plenty of water and seek medical advice. Gloves during use
Protective mask and glasses should be used.
English 
Turkish 
German 
Russian 
Arabic