PROWILL STELL 1400
It is a high-quality and ready-to-use mold release agent that prevents adhesion between fresh concrete and mold, ensures easy separation of the mold from the concrete, provides a smooth and spotless surface, is resistant to steam cure. It was developed to obtain effective results in large surface concrete molds.
Download pdf document- It prevents corrosion by preventing rust on steel doors.
- It is ready to use and applied directly without dilution.
- It is resistant to heat and steam cure applications.
- It gives excellent results on smooth molds with low absorbency.
- It is easy to apply.
- It allows the mold to be separated from the concrete quickly.
- It provides a spotless and smooth surface on the concrete by reducing air bubbles on the concrete surface.
- It extends the life of the mould.
- Does not contain solvents
- It is a liquid with high fluidity and does not cause blockage in the spraying machine.
- Especially in tunnel steel formwork systems where steam cure is applied and heated,
- Low absorbency, smooth molds
- Plywood mold systems
- In polyester mold systems
- On precast, slip mold surfaces
- It is suitable for use in detailed and large surface concrete molds.
In 30 KG plastic drums
It can be stored for 12 months in its unopened package in a cool and dry environment between +5°C / +30°C. Shake well before use. Protect against freezing.
ISSUES TO BE CONSIDERED
- Make sure that the mold surfaces are thoroughly cleaned before application. Excessive use causes ripples on the concrete surface. Therefore, the appropriate consumption amount should be determined by preliminary tests under construction site conditions.
- Do not allow accumulation on the mold surfaces during application.
- Protect newly applied formwork surfaces from rain before pouring concrete.
- It is not recommended to apply below +5°C and under heavy rain.
- It is a ready-to-use product and never add water to the product.
Appearance | dark brown liquid |
Liquid Density | 0.86±0.02 kg/lt.(20°C) |
Flash Point | 15-20cSt .(+40°C) |
Application Temperature | ≥ 5°C |
English 
Turkish 
German 
Russian 
Arabic