PROTEK COLD 2000

PROTEK COLD 2000 should be added together with the mixing water during concrete mixing (the amount of water should be maximized).
should be minimized). Additionally, in the field, it is placed in the mixer 10 minutes before the concrete pouring process.
can join.
Casting should be done as uninterrupted and without delay as possible. • In cold weather, ensure that the aggregates are not frozen and the mold surfaces are free of ice and snow.
attention should be paid. • Concrete should be poured during the hottest hours of the day. • Although PROTEK COLD 2000 is effective against frost, the concrete must have a compressive strength of at least 5 Mpa.
Additional precautions should be taken to keep the concrete temperature between 5-10ºC until it reaches the desired temperature. • PROTEK COLD 2000 additive can be used down to -20ºC.

curing
Spilled concrete must be protected immediately. Clean the concrete surface with cold water
It should not be watered.
Rapport
PROTEK COLD 2000, increasing water wicking, fluidization and strength properties in concrete,
can be used with the following materials to accelerate concrete hardening. • By using water reducing concrete admixture, the mixing water -20 is further reduced. • By using air entraining admixture, the concrete is endurable to environmental freeze-thaw cycles.
is increased. • Additives such as micro silica, fly ash, slag, • Compatible with all cement types and classes. • With steel and synthetic concrete reinforcement.
CONSUMPTION
% 1 by weight of cement