CLEANER 100 SW
PROTEK CLEANER 100 SW It is a material used to clean residues such as concrete and cement on acid-resistant surfaces.
- It does not corrode the inner and outer surfaces of the surface on which it is used, nor does it change its appearance.
- Removes rust, dirt and concrete residues
To mix up
The material can be diluted with water at a ratio of 1:1 - 1:5, depending on the amount of residue on the surface.
- The material is poured onto the dry surface and spread with a brush.
- After waiting for 2-3 minutes, clean it by rubbing it manually with a cloth or with a wet-dry vacuum machine.
- In places with dense concrete residue, the material is applied several times with an interval of 15 minutes.
When cleaning difficult residues, the material should be kept on the coating for longer periods of time, without diluting with water.
- When cleaning is completed, the surface is washed with plenty of water and left to dry.
30 KG Plastic Drum
200 LT Barrel
Shelf life is 1 year when stored in its original packaging, in dry, protected and ventilated environments at +10°C / +30°C, protected from direct sunlight and frost.
Attention:
During application, protective gloves and glasses should be used.
SITUATIONS TO BE CONSIDERED
Since the product is acid based; Use glasses, protective work clothes and rubber gloves during use. Contact with skin should be prevented, in case of contact, wash with plenty of water and if irritation persists, consult a doctor immediately. Contact with eyes should be avoided, in case of contact, wash with plenty of water and consult a doctor immediately. If inhaled or swallowed, induce vomiting and seek medical advice immediately. Keep away from food and drinks. Keep out of reach of children.
English 
Turkish 
German 
Russian 
Arabic