EA 012 D 2K – Protect Kimya

EA 012D 2K

PROTECT-A EA 012 D 2K, epoxy resin based, two component, solvent-free, final
It has a superficial filling feature that ensures perfect adhesion of the layer to the surface.
It is a filled lining.

Download pdf document

Product features

PRODUCT FEATURES :
Content Epoxy Based
Density 1.40 – 1.50 (g/cm3, 23°C) (DIN EN ISO 2811-1)
Mixture Viscosity 1.000 – 3.000 (mPas, 23°C) (DIN 2555)
Adhesion Strength > 1.5 N/mm2 (ISO 4624)
Mixing Time 30 - 45 (min., 23°C, 200 g)
Shore D Hardness > 75 (DIN 53505)
Pre-curing 3 hours
Open to pedestrian traffic 24 hours
Top coat application 2-24 hours
Full cure 5-7 days

Application Method

The surfaces to be applied are solid, cured, dry, clean,
Must be portable. Dust, oil, grease, paint and similar materials that will reduce adherence
Any dirt must be thoroughly removed before application.
Component A is mixed slowly under a mixer, then component B is
slowly add it to component A and obtain a homogeneous mixture for 3-4 minutes at low speed.
It is mixed until the mixture is obtained. The prepared mixture is applied with a roller, brush or trowel.
should be implemented with the help of One or two coats depending on the texture of the application surface.
application is made. The second coat should be applied before the first coat is completely dry. Mixture 45
It should be consumed within minutes. The final coat to be applied depends on weather conditions.
It should be done after 2 to 24 hours. Final curing is completed in 7 days. APPLICATION
The surface should be protected from water and precipitation for the following 24 hours. APPLICATION
Make sure that the ambient and ground temperature is between +10°C and +30°C.
should be done. Application should not be made in rainy and windy weather.

Suggestions

Take into account the working time of the mixture.
It may harm health in contact with skin.
Do not apply in frosty or frost-risk weather.
Until the applied surface is completely dry, rain, frost, pedestrian traffic and high
Protect from moisture.
In conditions where the surface and ambient temperature is lower than +10°C and higher than +35°C
Do not apply.
Storage And Shelf Life:
In a dry and cool environment between +5°C and +35°C, unopened in its original packaging.
store it. Do not leave in the sun and protect from frost. It has a shelf life of 12 months.
PACKAGING :
Component A: 25 kg + Component B: 5 kg = 30 kg set
Consumption:
0.200 – 0.500 kg/m2.

Usage areas

It can be applied on surfaces such as concrete, asphalt, steel, wood, epoxy and polyurethane.
before application,
▪ Polyurethane surface coating to be applied to asphalt and floors outdoors
Before applying the materials,
▪ Cement based coating used for coating and repair purposes on old concrete.
As an adhesion enhancing primer before using materials,
▪ It can be used to fill hairline cracks on the concrete surface.

Safety And Warnings

Do not consume solid or liquid substances or smoke during application. Protector
Use gloves, glasses and clothing. Avoid eye and skin contact. skin contact
If necessary, wash with plenty of water and soap. In case of eye contact, rinse with plenty of water and immediately
consult a doctor. Keep out of reach of children. Do not swallow, it is empty
Do not use the packages to store foodstuffs and drinking water.

Menderes/İzmir

Telephone

Mail

EA 012D 2K

EA 012D 2K

Mail

Telephone

Address

about us