BASE COAT 012 2K
Two Component Epoxy Interlayer Material
Two-component, solvent-based epoxy intermediate coat primer.
Download pdf document
Anticorrosive epoxy systems as an intermediate layer after priming in epoxy floor coveringsIt is also used as an intermediate layer between anticorrosive primer and topcoat paint. It provides long-term resistance to the system.
It can be applied by brush, roller and spraying. Thinner is used for thinning in application by spraying on metal surfaces. Paint thinned to viscosity in 18-20 seconds /DIN CUP4/ 20°C can be applied with a gun to give a 35-40 micron dry film on the metal. The mixture prepared for application with a brush or roller is applied without diluting.
Application should be avoided below 10°C and in very humid environments.
The ideal application temperature is between 10°C and 30°C.
STORAGE
The product should be stored between 5-35°C.
* The product should not be exposed to direct sunlight.
* The opened product should be stored in its own packaging, with the lid tightly closed.
Colour | Gray - Oxide Red - Beige |
Appearance | Mat |
Thinner | Epoxy Thinner |
Intensity | 1.55g/cm³ |
PACKAGING | 21 kg Component A + 3 kg Component B: Total 24 kg |
Flash point | >25 °C |
Mixing ratio | 7 / 1 |
Application Methods | Brush, Roller, Air Gun, Airless Gun |
Pot Life | 1 hour / 25°C |
Shelf life | 1 year |
Waiting Time Between Floors | 6 hours / 25°C |
Drying Time | 12 hours/25°C |
Mechanical Strength | 7 days |
The product is for professional use. Before use, pay attention to the safety warnings on the packaging, and if necessary, refer to the Material Safety Data Sheet of the product. Do not inhale, avoid contact with skin and eyes, do not swallow, use appropriate occupational safety equipment. Take the necessary precautions to avoid contamination of the environment as well as the risk of fire and explosion. Apply in well-ventilated environments.
English 
Turkish 
German 
Russian 
Arabic