Application Instructions
The surface is solid, free from loose and weak parts, free from frost, cement grout,
foreign matter and other contaminants such as ponded water, oil, grease, wax, coatings etc.
must be removed and clean. The surface must be prepared by suitable mechanical preparation techniques such as high pressure water or abrasive equipment. All dust, loose and friable materials must be completely removed, preferably by brush and/or vacuum, before application.
In a clean container, free from any substances that may prevent adhesion, or in its own container.
In its packaging, minimum 4 lt and maximum 6 lt of water is added to a 12 kg bucket of Exposed Concrete Primer.
and mixed homogeneously with a low speed mixer (400-600 rpm).
It should be mixed at regular intervals while working with Exposed Concrete Primer.
Apply to the surface by brush, roller or spraying.
Application Notes
The product may cause irritation on contact with the skin. Work clothes, protective gloves, mask and glasses
should be used. Protective cream can also be applied to hands before starting work. Mortar should not come into contact with eyes.
In case of contact with the eyes, rinse immediately with warm water and consult a doctor.
Do not add foreign matter.
After application, direct sunlight, strong wind, high air temperature (over +35°C)
should be protected against adverse weather conditions such as rain and frost. The product should be fully cured and
Before it hardens, hands should be cleaned with water and detergent.
Immediately after application, before the product hardens, the equipment should be cleaned with water.
After it hardens, it should be cleaned by mechanical methods.
Download pdf document
English 
Turkish 
German 
Russian 
Arabic